共找到 150 條與 輝光放電原子發射光譜法 相關的標準，共 10 頁
本標準規定了用電感耦合等離子體原子發射光譜法測定化學試劑中金屬以及非金屬雜質的要求和測定方法。 本標準適用于化學試劑中含多種雜質的液體試樣或去除基體后的試液直接進樣，用電感耦合等離子體原子發射光譜法（ICP-AES）進行測定。本標準不適用于固體取樣
Chemical reagent.General rules for inductively coupled plasma atomic emission spectrometry
本文件規定了火焰原子吸收光譜法和電感耦合等離子體發射光譜法測定硬質合金中的鉛量和鎘量。 本文件適用于鉛量和鎘量在0.0001%(質量分數)~0.1%(質量分數)之間的硬質合金
Hardmetals—Determination of lead and cadmium content—Flame atomic absorption spectrometric method and inductively coupled plasma atomic emission spectrometry
Tin and lead babbits. Method of inductively coupled plasma atomic-emission spectrometry
Chemical analysis of refractories－General requirements for wet chemical analysis, atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry methods
4.1 This test method usually requires several minutes
Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
Scope is not provided for this standard
Chemical analysis of refractories -- General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
Iron and steel -- Methods for inductively coupled plasma atomic emission spectrometry (Amendment 1)
Radiation protection instrumentation - Measurement of discrete radionuclides in the environment - In situ photon spectrometry system using a germanium detector
This International Standard specifies an inductively coupled plasma atomic emission spectrometric method for the determination of the mass fraction
Nickel alloys - Determination of tantalum - Inductively coupled plasma atomic emission spectrometric method
IEC 61275:2013 is applicable to a portable or transportable photon spectrometry assembly using a high purity germanium (HPGe) detector to survey
Radiation protection instrumentation - Measurement of discrete radionuclides in the environment - In situ photon spectrometry system using a germanium detector
Radiation protection instrumentation－Measurement of discrete radionuclides in the environment－In situ photon spectrometry system using a germanium detector
The chemical composition of high manganese steel alloys must be determined accurately to ensure the desired metallurgical properties
Standard Test Method for Analysis of High Manganese Steel Using Atomic Emission Spectrometry
Chemical analysis of refractories－General requirements for wet chemical analysis, atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry methods
警告：使用GB/T 7731的本部分的人員應有正規實驗室工作的實踐經驗。本部分并未指出所有可能的安全問題。使用者有責任采取適當的安全和健康措施，并保證符合國家有關法規規定的條件。 GB/T 7731的本部分規定了羅丹明B光度法和電感耦合等離子體原子發射光譜法測定鎢鐵中的銻量。 本部分適用于鎢鐵中
Ferrotungsten.Determination of antimony content.The tetraethlrhodamine photometrie method and inductively couple plasma-atomic mission spectrometry
1.1 This method provides for the analysis of high manganese steel by atomic emission spectrometry using the point-to-plane technique
Standard Test Method for Analysis of High Manganese Steel Using Atomic Emission Spectrometry
