GMSA EMS 9309728-2011 用于冷卻系統的合成黑色搪瓷 Esmalte sint 隱爵co preto para pintura de radiadores

Synthetic black enamel for cooling system Esmalte sint閠ico preto para pintura de radiadores

API PUBL 4573-1994 使用 FTP IM240 和遙感進行 HC 和 CO 排放估算的比較：統計分析

Comparison of HC and CO Emission Estimates Using FTP@ IM240 and Remote Sensing: Statistical Analysis

ISO 4696-1:2007 鼓風爐給料用鐵礦石.用統計方法測定鐵礦石低溫還原分解指數.第1部分:CO、CO₂、H₂和N₂的還原反應

This part of ISO 4696 specifies a method to provide a relative measure for evaluating the degree of size degradation of iron ores when reduced

Iron ores for blast furnace feedstocks - Determination of low-temperature reduction-disintegration indices by static method - Part 1: Reduction with CO, CO₂, H₂ and N₂

AENOR UNE 81218:1980 針對 CO 的化學和混合過濾器 低溫行為

W/D NO S/S

CHEMICAL AND MIXED FILTERS AGAINST CO. BEHAVIOR AT LOW TEMPERATURE

JJG 1027-2007 醫用<左上標 60 >Co遠距離治療輻射源檢定規程

本規程適用于醫用Co遠距離治療輻射源的首次檢定、后續檢定和使用中檢驗。醫用Co遠距離治療輻射源有用射束劑量率范圍約為0.01Gy/min～10Gy/min

Medical Radiation Source for Co Teletherapy

UL 2075A-2008 用于氣體和蒸汽探測器和傳感器的 CO 氣體測試套件

CO Gas Test Kit for Gas and Vapor Detectors and Sensors2075A1 Scope1.1 These requirements cover CO gas test kits used to test CO gas and vapor

CO Gas Test Kit for Gas and Vapor Detectors and Sensors

YC/T 30-1996 卷煙煙氣相中CO的測定非散射紅外法

本標準規定了煙氣氣相中一氧化碳的測定方法。 本標準適用于卷煙

Cigarettes--Determination of carbon monoxide in the gas phase of smoke--NDIR method

DIN CEN/TR 17310:2020 碳酸化和CO<(指數)2>混凝土中的吸收

Carbonation and CO<(Index)2> uptake in concrete

ASTM F2856-12(2020 彩彈用小型CO2鋼瓶的注入和安全操作的標準實施規程

1.1 This practice is intended to satisfy the demand for information on the basic procedures for the safe handling and transfilling of small (not bulk

Standard Practice for Transfilling and Safe Handling of Small CO2 Cylinders for Use in Paintball

UNI EN 4327:2001 航空級 耐熱合金CO-WH1401（CoCr26Ni11W8） 焊接用合金 絲材和棒材

La presente norma è la versione ufficiale in lingua inglese della norma europea EN 4327 (edizione giugno 2001). La norma è parte di una

CO-WH1401 (CoCr26Ni11W8) - Filler metal for welding - Wire and rod

BS EN 3888:2001 航空航天系列.耐熱合金CO-WH1402(CoCr22Ni22W15).焊接用填充金屬

This standard specifies the requirements relating to: Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) Filler metal for welding for aerospace

Aerospace series - Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) - Filler metal for welding

UNE-EN 3887:2002 航空航天系列-耐熱合金CO-WH4101（CoCr20W15Ni）-焊接用填充金屬

Aerospace series - Heat resisting alloy CO-WH4101 (CoCr20W15Ni) - Filler metal for welding.

LST EN 3887-2002 航空航天系列 耐熱合金CO-WH4101（CoCr20W15Ni）焊接用填充金屬

Aerospace series - Heat resisting alloy CO-WH4101 (CoCr20W15Ni) - Filler metal for welding

UNE-EN 3888:2002 航空航天系列-耐熱合金CO-WH1402（CoCr22Ni22W15）-焊接用填充金屬

Aerospace series - Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) - Filler metal for welding.

DIN EN 2714-005:2008 航空航天系列.一般用途用單芯和多芯電纜.工作溫度為-55℃～260℃之間.第005部分:可用CO₂激光印字屏蔽的(螺旋形的)和置于殼內的電纜.產品標準

This standard specifies the characteristics of CO2 laser printable, single and multicore screened (spiral) and jacketed electrical cables

Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 005: Screened (spiral) and jacketed, CO₂ laser printable - Product standard; German and English version EN 2