ZH
KR
JP
ES
RU
DERelative intensity of infrared peaks
Relative intensity of infrared peaks, Total:78 items.
In the international standard classification, Relative intensity of infrared peaks involves: Domestic, commercial and industrial heating appliances, Installations in buildings, Construction materials, Road engineering, Thermodynamics and temperature measurements, Plastics, Optics and optical measurements, Products of the textile industry, Paint ingredients, Rubber, Protection against crime, Solar energy engineering, Reinforced plastics, Medical equipment, Optoelectronics. Laser equipment, Products of the chemical industry, Semiconductor devices, Environmental testing, Analytical chemistry, Rubber and plastics products, Coals.
SCC, Relative intensity of infrared peaks
American National Standards Institute （ANSI), Relative intensity of infrared peaks
American Society for Testing and Materials (ASTM), Relative intensity of infrared peaks
- ASTM D7172-06 Standard Test Method for Determining The Relative Density (Specific Gravity) And Absorption Of Fine Aggregates Using Infrared
- ASTM D7172-14 Standard Test Method for Determining the Relative Density 40;Specific Gravity41; and Absorption of Fine Aggregates Using Infrared
- ASTM D6248-98 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
- ASTM D6248-98(2004) Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
- ASTM D7172-06e1 Standard Test Method for Determining The Relative Density (Specific Gravity) And Absorption Of Fine Aggregates Using Infrared
- ASTM E2911-23 Standard Guide for Relative Intensity Correction of Raman Spectrometers
- ASTM E2911-13 Standard Guide for Relative Intensity Correction of Raman Spectrometers
Jilin Provincial Standard of the People's Republic of China, Relative intensity of infrared peaks
Association Francaise de Normalisation, Relative intensity of infrared peaks
- NF ISO 22754:2009 Pulp and paper - Determination of relative residual ink concentration (ERIC number) by measuring infrared reflectance
- NF T46-055:1990 Vulcanized or thermoplastic rubber. Analysis of the multipeak traces obtained when determining the adhesive strength and the tear strength.
Military Standard of the People's Republic of China-General Armament Department, Relative intensity of infrared peaks
- GJB 9723-2020 On-board radiation calibration method for spaceborne Earth observation infrared cameras
- GJB 5214.19-2003 Special bomb effect test method Part 19: Bandpass method for measuring infrared radiation intensity of infrared jamming bombs
- GJB 9925-2021 External field radiation calibration method of spaceborne infrared camera
(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Relative intensity of infrared peaks
- JEDEC JEP78-1969 Relative Spectral Response Curves for Semiconductor Infrared Detectors
Canadian Standards Association/American National Standards , Relative intensity of infrared peaks
Canadian Standards Association (CSA), Relative intensity of infrared peaks
Underwriters Laboratories (UL), Relative intensity of infrared peaks
Taiwan Provincial Standard of the People's Republic of China, Relative intensity of infrared peaks
- CNS 11365-1985 Method of Test for Relative Zeolite Diffraction Intensities
Professional Standard - Machinery, Relative intensity of infrared peaks
國家市場監督管理總局、中國國家標準化管理委員會, Relative intensity of infrared peaks
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Relative intensity of infrared peaks
- GB/T 6688-1986 Determination of relative strength of dyes(Instrumental method)
- GB/T 1463-2005 Test methods for density and relative density of fiber reinforced plastics
- GB/T 1463-1988 Test methods for density and relative density of fiber reinforced plastics
- GB/T 12833-1991 Rubber and plastics--Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
- GB/T 6688-2008 Dyestuffs.Determination of relative strength and color difference.Instrumental method
- GB/T 12833-2006 Rubber and plastics. Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength
- GB/T 27594-2011 Disperse dyestuffs.Determination of relative strength of presscakes.Spectrophotometer method
- GB/T 12680.1-1990 Test method for the relative strength and shade of alcohol soluble dyes
CZ-CSN, Relative intensity of infrared peaks
- CSN 65 9705-1987 Organic pigments. Method of relative strength and stradě determination
Professional Standard - Public Safety Standards, Relative intensity of infrared peaks
- GA/T 583-2005 The regulation of the infrared photography and videography
- GA/T 1669-2019 Technical Requirements for Forensic Science Ultraviolet and Infrared Digital Cameras
Korean Agency for Technology and Standards (KATS), Relative intensity of infrared peaks
- KS B ISO 9847:2003 Solar energy－Calibration of field pyranometers by comparison to a reference pyranometer
- KS M 0024-2017 General rules for infrared spectrophotometric analysis
- KS M 0024-1987 General rules for infrared spectrophotometric analysis
Japanese Industrial Standards Committee (JISC), Relative intensity of infrared peaks
Professional Standard - Electron, Relative intensity of infrared peaks
- SJ 2658.12-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for peak emission wavelength and spectral half width
- SJ/T 2658.9-2015 Measuring method for semiconductor infrared-emitting diode.Part 9: Spatial distribution of radiant intensity and half-intensity angle
- SJ/T 2658.8-2015 Measuring method for semiconductor infrared-emitting diode.Part 8: Radiant intensity
- SJ 2658.9-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for the intensity space distribution and half-intensity angle of radiation
Professional Standard - Agriculture, Relative intensity of infrared peaks
National Metrological Verification Regulations of the People's Republic of China, Relative intensity of infrared peaks
SE-SIS, Relative intensity of infrared peaks
- SIS SS 24 21 23-1982 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
Shandong Provincial Standard of the People's Republic of China, Relative intensity of infrared peaks
- DB37/T 5231-2022 Technical Regulations for Detection of Similarity of Road Petroleum Asphalt by Infrared Spectroscopy
Spanish Association for Standardization (UNE), Relative intensity of infrared peaks
- UNE 53612:1984 RUBBER-ANALYSIS OF MULTI-PEAK TRACES OBTAINED IN DETERMINATIONS OF TEAR STRENGTH AND ADHESION STRENGTH
- UNE-ISO 6133:2022 Rubber and plastics. Analysis of multi-peak traces obtained of determinations of tear strength and adhesion strength
American Gear Manufacturers Association, Relative intensity of infrared peaks
- AGMA 09FTM06-2009 Dependency of the Peak-to-Peak-Transmission-Error on the Type of Profile Correction and the Transverse Contact Ratio of the Gear Pair
GSO, Relative intensity of infrared peaks
- OS GSO ISO 6133:2015 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
- BH GSO ISO 6133:2016 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
PL-PKN, Relative intensity of infrared peaks
- PN E04453-1954 Magnetic sheets used in electrical engineering -- Determination of relativity of induction from magnetic field intensity by absolute method using ring test specimen
Standard Association of Australia （SAA）, Relative intensity of infrared peaks
- AS 1193:1974 Determination of the density and relative density of plastics excluding cellular plastics
Australian/New Zealand Standard (AU-AS/NZS), Relative intensity of infrared peaks
- AS/NZS 3889:1993 Rubber and Plastics - Analysis of Multi-Peak Traces Obtained in Determinations of Tear Strength and Adhesion Strength
Jiangsu Provincial Standard of the People's Republic of China, Relative intensity of infrared peaks
- DB32/T 4340-2022 Asphalt Infrared Spectroscopy Similarity Recognition and SBS Content Testing Procedures
Group Standards of the People's Republic of China, Relative intensity of infrared peaks
- T/GDC 242-2023 Modified High Density Polyethylene (Ds PE) Double Order Peak Enhancement Tube
British Standards Institution (BSI), Relative intensity of infrared peaks
- BS ISO 6133:2015 Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
South African Bureau of Standard, Relative intensity of infrared peaks
- SANS 5072:2005 Brown coals and lignites - Determination of true relative density and apparent relative density
German Institute for Standardization, Relative intensity of infrared peaks
- DIN ISO 6133 E:2016-09 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength